Martin ego 1 manual

If PortaFM is not registered, each session will be restricted to 4 minutes and no saving will be allowed. Bidule Standalone for Windows Version. This version of Bidule will run in demo mode until January 14th, The plug-in version of Bidule will only work for registered users.

Make sure to install and register the standalone version before attempting to use the plug-in version. Verify that the clearance around the air vents is at least 0.

Consult a qualified electrician if you have any doubts about proper installation. For protection from dangerous electric shock, the fixtu … 7. Martin Ego 01 14 Ego user manual 1 Disconnect the fixture from power and allow the components to cool completely. Do not rub the surface: lift the particles off with a soft repeated press. Measurements are expressed in millimeters. All rights reserved.

Printed in Denmark. All other trademarks are the property of their respective owners. All specifications subject to change at any time. Featuring ANSI lumens and a high contrast ratio of We are in no way responsible for the contents of the manual. We do not guarantee its accuracy and we do not make any claim of copyright. The copyright remains the property of their respective owners.

COM Projector. Visit the site to read the latest projector news and reviews, read When replacing the lamp, allow the fixture to cool for at least 5 minutes before opening the fixture or removing the lamp. Block access below the work area before proceeding. Always use a secure means of secondary attachment. Page 9: Operation From The Floor 5 Install a safety cable that can hold at least 10 times the weight of the fixture through the handle of the of the fixture.

The lamp turns on as soon as power is applied. The action is varied whenever trigger signals are generated as a result of sounds picked up by the built-in microphone manual trig or randomly when the fixture is in auto trig mode. Page Focusing The Ego The separately orderable remote control unit can be used to link multiple Egos and allows the simultaneous adjustment of their dynamics. Page Operation With The Optional Remote Control 4 Pull the tab away from the fixture base to select the textured glass, push it towards the fixture to select the etched gobo position.

Page Lamp Maintenance 1 Disconnect the fixture from power and allow the components to cool completely. Page Fuses If the fuse blows repeatedly, there is a fault with the unit that requires service by a Martin technician. Never bypass the fuse or replace it with one of another size or rating. Page Gobo Replacement Or Removal Ego 2 The factory installed firmware version is indicated on the serial number label.

To install the firmware update, prepare the AVR Uploader as described in its user manual, connect the uploader to the AVR Upload socket on the control panel, and apply power to the fixture.